build:troubleshooting
Differences
This shows you the differences between two versions of the page.
| build:troubleshooting [2026/10/11 00:50] – created nigel | build:troubleshooting [2026/10/11 00:53] (current) – nigel | ||
|---|---|---|---|
| Line 27: | Line 27: | ||
| 11. Check traces do not short to near by traces. | 11. Check traces do not short to near by traces. | ||
| 12. Check for shorts between pins, dry solder, bad joints. | 12. Check for shorts between pins, dry solder, bad joints. | ||
| + | |||
| + | If things did work but now they don't this is more of a repair process and some basic steps are: | ||
| + | |||
| + | 1. Test and replicate the fault repeatedly to provide a baseline for the error. | ||
| + | 2. Search for a block diagram of what is going on or create one. Check the schematic or create one and map this thru. Check you can follow power through the schematic and that it is going thru the board. | ||
build/troubleshooting.txt · Last modified: by nigel