| Next revision | Previous revision |
| design:footprint_assign [2026/10/12 19:40] – created nigel | design:footprint_assign [2026/10/19 21:20] (current) – nigel |
|---|
| |
| ^ Part ^ Footprint ^ Notes ^ | ^ Part ^ Footprint ^ Notes ^ |
| | Mounting Holes ||| | | //Mounting Holes// ||| |
| | M2.5 spacers | ''MountingHole:MountingHole_2.7mm_M2.5'' | | | | M2.5 spacers | ''MountingHole:MountingHole_2.7mm_M2.5'' | | |
| | Eurorack FP drill holes | ''MountingHole:MountingHole_3.2mm_M3'' | | | | Eurorack FP drill holes | ''MountingHole:MountingHole_3.2mm_M3'' | | |
| | Connectors ||| | | //Connectors// ||| |
| | Eurorack shrouded power connector | ''Connector_IDC:IDC-Header_2x08_P2.54mm_Vertical'' | Reverse* | | | Eurorack shrouded power connector | ''Connector_IDC:IDC-Header_2x08_P2.54mm_Vertical'' | Reverse* | |
| | Board connections | ''Connector_PinSocket_2.54mm:PinSocket_1x0n_P2.54mm_Vertical'' | Main board | | | Board connections | ''Connector_PinSocket_2.54mm:PinSocket_1x0n_P2.54mm_Vertical'' | Main board | |
| | | ''Connector_PinHeader_2.54mm:PinHeader_1x0n_P2.54mm_Vertical'' | Control board, reverse | | | | ''Connector_PinHeader_2.54mm:PinHeader_1x0n_P2.54mm_Vertical'' | Control board, reverse | |
| | Thonkiconn jack | ''Connector_Audio:Jack_3.5mm_QingPu_WQP-PJ398SM_Vertical_CircularHoles''' | drill out the keepout | | | Thonkiconn jack | ''Connector_Audio:Jack_3.5mm_QingPu_WQP-PJ398SM_Vertical_CircularHoles'' | drill out the keepout | |
| | Test point | ''TestPoint:TestPoint_Loop_D2.50mm_Drill1.0mm'' | Reverse and label | | | Test point | ''TestPoint:TestPoint_Loop_D2.50mm_Drill1.0mm'' | Reverse and label | |
| | Resistors ||| | | //Resistors// ||| |
| | 1% 1/4W | ''Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_Vertical'' | I use this as the default | | | 1% 1/4W | ''Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_Vertical'' | I use this as the default | |
| | | ''Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal'' | To route tracks under the part | | | | ''Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal'' | To route tracks under the part | |
| | Trim pots | ''Potentiometer_THT:Potentiometer_Bourns_3296X_Horizontal'' | Main board | | | Trim pots | ''Potentiometer_THT:Potentiometer_Bourns_3296X_Horizontal'' | Main board | |
| | | ''Potentiometer_THT:Potentiometer_Bourns_3296W_Vertical'' | Control board | | | | ''Potentiometer_THT:Potentiometer_Bourns_3296W_Vertical'' | Control board | |
| | Capacitors ||| | | //Capacitors// ||| |
| | Ceramic | ''Capacitor_THT:C_Disc_D4.7mm_W2.5mm_P5.00mm'' | Typically power | | | Ceramic | ''Capacitor_THT:C_Disc_D4.7mm_W2.5mm_P5.00mm'' | Typically power | |
| | Film | ''Capacitor_THT:C_Rect_L7.2mm_W2.5mm_P5.00mm'' | Typically all others | | | Film | ''Capacitor_THT:C_Rect_L7.2mm_W2.5mm_P5.00mm'' | Typically all others | |
| | Electrolytic | ''Capacitor_THT:CP_Radial_D5.0mm_P2.50mm'' | Good for the power, check others sizes | | | Electrolytic | ''Capacitor_THT:CP_Radial_D5.0mm_P2.50mm'' | Good for the power, check others sizes | |
| | Diodes ||| | | //Diodes// ||| |
| | Schottky | ''Diode_THT:D_DO-41_SOD81_P10.16mm_Horizontal'' | Good for the power, check others sizes | | | Schottky | ''Diode_THT:D_DO-41_SOD81_P10.16mm_Horizontal'' | Good for the power, check others sizes | |
| | Signal | ''Diode_THT:D_DO-35_SOD27_P7.62mm_Horizontal'' | | | | Signal | ''Diode_THT:D_DO-35_SOD27_P7.62mm_Horizontal'' | | |
| | LED | ''LED_THT:LED_D3.0mm_FlatTop'' | | | | LED | ''LED_THT:LED_D3.0mm_FlatTop'' | | |
| | | //Transistors, etc// ||| |
| | | TO-92 package | ''Package_TO_SOT_THT:TO-92_Inline_Wide'' | JLCPCB does not support the tolerances | |
| |
| |
