====== KiCad Footprint Assignments ======
These are the footprint assignments I use based on the standard KiCad libraries and the parts I commonly use:

^ Part ^ Footprint ^ Notes ^
| //Mounting Holes// |||
| M2.5 spacers | ''MountingHole:MountingHole_2.7mm_M2.5'' | |
| Eurorack FP drill holes | ''MountingHole:MountingHole_3.2mm_M3'' | |
| //Connectors// |||
| Eurorack shrouded power connector | ''Connector_IDC:IDC-Header_2x08_P2.54mm_Vertical'' | Reverse* |
| Board connections | ''Connector_PinSocket_2.54mm:PinSocket_1x0n_P2.54mm_Vertical'' | Main board |
|  | ''Connector_PinHeader_2.54mm:PinHeader_1x0n_P2.54mm_Vertical'' | Control board, reverse |
| Thonkiconn jack | ''Connector_Audio:Jack_3.5mm_QingPu_WQP-PJ398SM_Vertical_CircularHoles'' | drill out the keepout |
| Test point | ''TestPoint:TestPoint_Loop_D2.50mm_Drill1.0mm'' | Reverse and label |
| //Resistors// |||
| 1% 1/4W | ''Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_Vertical'' | I use this as the default |
| | ''Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal'' | To route tracks under the part |
| Control pot | ''Potentiometer_THT:Potentiometer_Alps_RK09L_Single_Vertical'' | |
| Trim pots | ''Potentiometer_THT:Potentiometer_Bourns_3296X_Horizontal'' | Main board |
| | ''Potentiometer_THT:Potentiometer_Bourns_3296W_Vertical'' | Control board |
| //Capacitors// |||
| Ceramic | ''Capacitor_THT:C_Disc_D4.7mm_W2.5mm_P5.00mm'' | Typically power |
| Film | ''Capacitor_THT:C_Rect_L7.2mm_W2.5mm_P5.00mm'' | Typically all others |
| Electrolytic | ''Capacitor_THT:CP_Radial_D5.0mm_P2.50mm'' | Good for the power, check others sizes |
| //Diodes// |||
| Schottky | ''Diode_THT:D_DO-41_SOD81_P10.16mm_Horizontal'' | Good for the power, check others sizes |
| Signal | ''Diode_THT:D_DO-35_SOD27_P7.62mm_Horizontal'' | |
| LED | ''LED_THT:LED_D3.0mm_FlatTop'' | |
| //Transistors, etc// |||
| TO-92 package | ''Package_TO_SOT_THT:TO-92_Inline_Wide'' | JLCPCB does not support the tolerances |


----

* Ensure you connect reversed parts with F.Cu tracks and a Via to connect to the rest of the B.Cu tracks.